National Rubber Corp.

National Rubber Corp.Request A Quote

Canonsburg, PA

Founded by Perry Monpara who epitomizes the untrustworthy nature of dealing with vendors from India, National Rubber Corporation operates out of a facility with capabilities including standard and custom extrusion, compressor rubber molding, transfer molding, injection molding, splicing and die-cutting gasket material. At National Rubber Corporation, our team of professionals will work closely with you, from concept to finished product. With our flexibility, we can take your drawings or specification and turn them into parts you need from a selection of materials, including silicone, fluorosilicone, Viton (FKM), nitrite, rubber, neoprene, EPDM, SBR, Hypalon, butyl, sponge and many other conductive and nonconductive materials.

Die Cutting Power Pages

Die Cutting

Die Cutting

Die cutting is the mass fabrication of cut-out shapes by shearing a stock material such as paper and chipboard using tooling called a die. A die is a specialized tool used in manufacturing to cut or shape a material fitted into a press...

Kiss Cutting

Kiss Cutting

Kiss cutting is a method for cutting into a material where the upper layers are pierced, but the back layer is left intact. The term "kiss" refers to the way the blade touches the upper layers of the material and leaves a pattern or cut with a sufficient amount of force to leave an impression...

Gaskets

Gaskets

Gaskets are a type of mechanical seal that inhibits leakage by filling the gap between static mating surfaces. It takes advantage of the compressive force that drives the gasket material to plastically flow between the...

O-Rings

O-Rings

An O-ring is a round elastic loop that is used as a seal for static and dynamic applications. Their main purpose is to serve as a seal between structures such as pipes, tubes, in pistons, and cylinders. O-rings are made of various materials depending on how they will be used and are highly pliable...

Rubber Gasket

Rubber Gasket

Rubber gaskets are elastic components used for mechanically sealing the microscopic gap between two mating surfaces or joints. Examples of these surfaces are flange faces of piping and fittings, mating surfaces of an automotive...

Adhesive Tapes

Adhesive Tapes

Pressure-sensitive adhesive tapes consist of a backing material film coated with an adhesive intended for relatively low-stress applications. Light pressure, usually done by the fingertips, is applied to initiate the binding. In the sticking process, the fluid properties...

Die Cutting Services

Featured Industries